Basic features of Selex (PRP extraction centrifuge)

• Installed with a high torque alternating current (AC) induction motor to enable a quiet stable operation
• Designed in a special air-cooling structure to prevent the motor from being overheated and from making loud noise even in a non-refrigerating model
• Automatic recognition and warning system against overload, overheating and over speeding
• Operable under 60 dB noise level
• Equipped with a convenient digital display panel
• Automatic RPM/RCF conversion
• Door-lock safety device and door-drop prevention device
• Door openable in emergency (very useful in an unexpected power interruption)
• Rotors made of non-erodible materials that can be sterilized under high pressure
• Numbers diagonally engraved on rotors to make it easy to insert sample cases
• Powder-coated to guard against scratching or butting and to add beauty and refinement to the appearance of the centrifuge
• All products are manufactured and inspected under IEC 61010-2-020 Standard and Regulations
• Capable of being automatically opened

Advantages

• Mounted with soft start/stop functions capable of rotating at a reduced speed or accelerated/de-accelerated speed for samples or materials sensitive to sudden accelerated speed or sudden de-accelerated speed
• Automatic recognition and warning system against asymmetry, overload, overheating or overspeeding
• Capable of storing 100 or more programs

Specification

Max. RPM 4,000 RPM
Max. RCF 2,700 x g
Max. capacity 15 ㎖ x 16
Run time ≤ 99 min 59 sec or continuo
Acceleration time ≤ 20 sec
Deceleration time ≤ 25 sec
Program memory 10
Power & Frequency 220V(110V optional), 50~60 Hz
Dimension(W x D x H)mm 375 x 480 x 26
Weight without rotor 19.5 Kg

Closed Suction Catheter_HME Filter / Filtration Efficiency / Breathing Circuit

HME Filter

• Install at Breathing Circuit
• Maintain the fuction to raise temperature/humidification of patients without using Heated Humidifier

Filtration Efficiency

• Bacter. Efficiency : > 99.99999%
• Viral efficiency : > 99.999%
• Mycobacterium Tuberculosis : > 99.999%
• Moisture output : 30 mg H2O/I at VT 500 ml

Breathing Circuit

• Classified as two types : Conventional type and Expandable type which is easy to change the size
• This product includes breathing bag that can be connected to an anesthetic device in order to supply air, if necessary.

Closed Suction Catheter for Adult & Neo/Ped

• Suction control switch with smart design
• Ultralight device ; easy to use and helping fast suction
• Minimize the physical stress of pediatric patient while suction
• Use it for a single patient in 24 hours

TUBEX_PRP Extraction Process Done Easier with Tubex

PRP extraction process is now fast, easy, and simple with Tubex

PRP (Platelet Rich Plasma)

PRP, or Platelet Rich Plasma, is an autologous blood with a high concentration of platelets. Typically, blood only contains about 5~6% of platelets. However, PRP has an over 94% of platelet concentration with strong regeneration power, and can adapt to a variety of solutions. Also, PRP does not cause any allergic reaction or any other side-effects since it is from the patient’s own blood.

Tubex (PRP Extraction Kit)

Tubex is a PRP extraction kit for efficient PRP extraction. Traditional PRP extraction has relatively low platelet concentration and involves exposing blood in the air, causing possible air contamination. Tubex minimizes the possibility of contamination and provides high platelet level than any other extraction kit.

Features of Tubex

Safety

We manufacture Tubex with biocompatibility medical plastic. It also goes through Gamma-ray sterilization, according to ISO 13485.

Fast, Simple, and Easy

Two tubes are interconnected, allowing simple and fast PRP extraction with less fatigue. Engraved scale mark on Tubex provides convenient measurement during the process.

Contamination-free

Tubex is hermetically structured in all connections, making it safe from air contamination and various contaminating sources.

High Concentration

With Vortex Technology, Tubex provides high platelet concentration PRP than other available PRP extraction kit.

Vortex Technology of Tubex

The Vortex Engineering method is a unique process helping to separate red cell and platelet, to minimize loss of platelet. We designed Tubex with a valve and a protrusion (structures) formed at the center of the tube to create vortex fluid flow inside the tube. The method allows a minimizing loss of platelet, unlike any other PRP extraction kit.