Hydrox Peel hydrox peeling system

Overview

This hydrox peeling system is designed to produce 5-100 micron sized particles of water that is dropping from the salinity, by utilizing hyperbaric oxygen. So, this system has a capability to deal with its work very fast and to carry out the operation as well. As a new concept of integrated skincare system, it can be applied for the treatment of inner wall of cell membrane by washing it with sterilized solution and pure oxygen.

Moisture & oxygen treatment

The hydrox peeling system can be specially used for the treatment of cosmetics and scalp operation and it strongly injects medication for a high effect of peeling and the injection of oxygen.

Features

• It has no any risk of burn or the damage of cell.
• Patient feels little pain and has no aversion at all.
• Very safe treatment with no adverse effect due to the use of water and pure oxygen.
• To maximize its therapeutic effect, oxygen, water and medication are combined properly.
• Very suitable method of treatment for workers because it won’t affect their daily life after the treatment.
• The system can be operated with a small amount of solution.

Advantages

• The system can be operated with minimal costs, without any power and medication, because it can remove dead skin cell and perform a simple peeling.
• Built-in dual decompression valve enhances stability of output power as well as accuracy of its treatment.
• Adjustable spray pressure can be applicable for a various treatments.
• Due to the interface, it can be operated right after the training.
• Hangers for hand piece and medical use are provided.
• Hand piece is attached with a nozzle protection cap for a long term use.
• Two hand pieces can be connected simultaneously depending on the application.
• Basic size can be applicable on the connection part of oxygen.
• It can be connected regardless of oxygen tank.

Principle of Hydrox Peel

By utilizing hyperbaric oxygen that comes out of the oxygen tank, medication in cell line can be sucked in according to the principle of difference of atmospheric pressure and passes through a hand piece nozzle. Afterward, it produces a great number of micron sized droplets and have them being sprayed at high speed.

Treatment of Hydrox Peel

The hydrox peeling system is designed to provide a new formula composed of 90-95% pure oxygen, vitamin C and natural fruit acid to the deep layer of dermis cell in order to boost skin’s natural renewal process. By utilizing hyperbaric oxygen, it makes sterilized medication to 5∼100um sized fine droplets and spray them at high speed for the treatment of peeling, cleansing and the care of scalp(to remove dead skin cell and cleaning) safely, as a new concept of integrated skincare system.

Hydrox Peel treatments target

This hydrox peeling system is designed to produce 5-100 micron sized particles of water that is dropping from the salinity, by utilizing hyperbaric oxygen. So, this system has a capability to deal with its work very fast and to carry out the operation as well. As a new concept of integrated skincare system, it can be applied for thetreatment of inner wall of cell membrane by washing it with sterilizedsolution and pure oxygen.

Target of Hydrox Peel

• The skin losing its elasticity, rough skin and pimples.
• Special treatment : Skincare for the bride, skincare for regeneration.
• Hair loss, dull and lacklustre hair.

Range of application

• Deep peeling of skin
• Regeneration of damaged skin caused by aging process or sunlight
• Sterilization and treatment of dead skin cell, fracture, external wound
• Care of wrinkles around the mouth
• Care of fine wrinkles around the eyes
• Black spot, acne, erythema
• Care of scalp

Medications for treatment

• Placenta: Effective on dry skin
• Collagen: Moisturizing effect
• Retinol : Lifting effect
• Arbutin: Whitening and moisturizing effect
• Vitamin C: Providing nutrient and regeneration of skin.
• Hyaluronic acid

Basic features of Selex (PRP extraction centrifuge)

• Installed with a high torque alternating current (AC) induction motor to enable a quiet stable operation
• Designed in a special air-cooling structure to prevent the motor from being overheated and from making loud noise even in a non-refrigerating model
• Automatic recognition and warning system against overload, overheating and over speeding
• Operable under 60 dB noise level
• Equipped with a convenient digital display panel
• Automatic RPM/RCF conversion
• Door-lock safety device and door-drop prevention device
• Door openable in emergency (very useful in an unexpected power interruption)
• Rotors made of non-erodible materials that can be sterilized under high pressure
• Numbers diagonally engraved on rotors to make it easy to insert sample cases
• Powder-coated to guard against scratching or butting and to add beauty and refinement to the appearance of the centrifuge
• All products are manufactured and inspected under IEC 61010-2-020 Standard and Regulations
• Capable of being automatically opened

Advantages

• Mounted with soft start/stop functions capable of rotating at a reduced speed or accelerated/de-accelerated speed for samples or materials sensitive to sudden accelerated speed or sudden de-accelerated speed
• Automatic recognition and warning system against asymmetry, overload, overheating or overspeeding
• Capable of storing 100 or more programs

Specification

Max. RPM 4,000 RPM
Max. RCF 2,700 x g
Max. capacity 15 ㎖ x 16
Run time ≤ 99 min 59 sec or continuo
Acceleration time ≤ 20 sec
Deceleration time ≤ 25 sec
Program memory 10
Power & Frequency 220V(110V optional), 50~60 Hz
Dimension(W x D x H)mm 375 x 480 x 26
Weight without rotor 19.5 Kg

Closed Suction Catheter_HME Filter / Filtration Efficiency / Breathing Circuit

HME Filter

• Install at Breathing Circuit
• Maintain the fuction to raise temperature/humidification of patients without using Heated Humidifier

Filtration Efficiency

• Bacter. Efficiency : > 99.99999%
• Viral efficiency : > 99.999%
• Mycobacterium Tuberculosis : > 99.999%
• Moisture output : 30 mg H2O/I at VT 500 ml

Breathing Circuit

• Classified as two types : Conventional type and Expandable type which is easy to change the size
• This product includes breathing bag that can be connected to an anesthetic device in order to supply air, if necessary.

Closed Suction Catheter for Adult & Neo/Ped

• Suction control switch with smart design
• Ultralight device ; easy to use and helping fast suction
• Minimize the physical stress of pediatric patient while suction
• Use it for a single patient in 24 hours

TUBEX_PRP Extraction Process Done Easier with Tubex

PRP extraction process is now fast, easy, and simple with Tubex

PRP (Platelet Rich Plasma)

PRP, or Platelet Rich Plasma, is an autologous blood with a high concentration of platelets. Typically, blood only contains about 5~6% of platelets. However, PRP has an over 94% of platelet concentration with strong regeneration power, and can adapt to a variety of solutions. Also, PRP does not cause any allergic reaction or any other side-effects since it is from the patient’s own blood.

Tubex (PRP Extraction Kit)

Tubex is a PRP extraction kit for efficient PRP extraction. Traditional PRP extraction has relatively low platelet concentration and involves exposing blood in the air, causing possible air contamination. Tubex minimizes the possibility of contamination and provides high platelet level than any other extraction kit.

Features of Tubex

Safety

We manufacture Tubex with biocompatibility medical plastic. It also goes through Gamma-ray sterilization, according to ISO 13485.

Fast, Simple, and Easy

Two tubes are interconnected, allowing simple and fast PRP extraction with less fatigue. Engraved scale mark on Tubex provides convenient measurement during the process.

Contamination-free

Tubex is hermetically structured in all connections, making it safe from air contamination and various contaminating sources.

High Concentration

With Vortex Technology, Tubex provides high platelet concentration PRP than other available PRP extraction kit.

Vortex Technology of Tubex

The Vortex Engineering method is a unique process helping to separate red cell and platelet, to minimize loss of platelet. We designed Tubex with a valve and a protrusion (structures) formed at the center of the tube to create vortex fluid flow inside the tube. The method allows a minimizing loss of platelet, unlike any other PRP extraction kit.

Closed Wound Drainage System MVAC Hemovac

‘That’ One Inconvenience, Removed

Wound drainage system

Complications may appear if the exudate or blood remains after surgery. To prevent the complications, the exudates, such body fluids and blood plasma, are drained from affected area after surgery. It consists of drainage vessel to continuously provide a lower vacuum pressure by the elastic restoring force of the silicone or spring, and a drainage tube for insertion into the affected part.

Using traditional Wound Drainage was difficult

All Traditional wound drainage share one inconvenient issue. It is frustrating and difficult to pressurizing and sealing cap at the same time. The difficulty was real before we introduced M-VAC. Please allow us to demonstrate with a short video clip.

Features of M-VAC

Convenient

With our Smart Dual Check Valve®, pressurizing is easy and faster than before. You don’t have to wrestle with a wound drainage in front of a patient anymore.

Reliable

We sterilize the product with our EO Gas sterilizer. We can perform quality control of sterilization, allowing higher reliability.

Autologous Blood Filler Maker_FILLEX

The Best Filler Comes From Yourself.

Choosing the best filler

There are so many fillers now available in the market than any other time. In this overflowing market, it is tough for the customers to choose a right filler for their skin condition. During the process, they need to consider so many variables, such as effectiveness, efficiency, possible side-effect, and so on. However, customers are overlooking the best manufacturer that produce exclusive filler that is just right for them: their body.

Autologous filler works best for you

Fillex, an autologous blood filler maker, makes filler after incubating plasma by using semiconductor thermoelements. Existing filler makers require transporting the syringe to another cooling device after heat incubation. However, Fillex offers ‘set-and-forget’ feature; All incubation process is done in one place. One button press is enough for the whole process.

Features of Fillex

Simple operation

Just put a syringe in and press the start button. Fillex will do the rest.

Fast incubating time

Fillex does not require pre-heating before the incubating process. It only takes minutes to reach the necessary temperature.

Adjustable options

Users can freely modify time and temperature depends on the extracted PPP. 

Dr Roller Derma Rolling System Mesoroller

Celebrate The New Era of Micro Needle Therapy With Dr. Roller

Principle of micro needling

Numerous active ingredients exist inside cosmetics and skin serums that are beneficial for skincare. As you apply those cosmetics and serums, you may feel like they are ‘absorbed’ into the skin. In fact, most of the ingredients rather ‘vaporize’ into the air because stratum corneum works as a barrier(The Recent Trend of Percutaneous Absorption Used in Cosmetics, 2014). How do we increase the efficiency of absorption? Here is when microneedle therapy (micro needling derma roller) comes in and solve this issue.
Micro needling creates several channels through an epidermis to a dermis. These channels work as a path for the active ingredients to reach directly to the dermis of the skin. These channels also extend the contact area of skin and those serum solutions. Overall, micro needling increases the efficiency of absorption tremendously.

Dr. Roller, the best micro needling derma roller

Micro needling derma roller device is simple; it is merely a roller with needles and rolls on skins. However, such a simplicity often leads many users to fall into a trap and suffer from a side effect of using a defective derma roller. In reality, manufacturing derma roller involves many technologies and knowledge.
We have been manufacturing Dr. Roller, the best derma roller in the world, since the year of 2006. We know that derma roller is not a simple device; it is sophisticated and requires precise manufacturing. All needles are precisely measured and inspected by trained experts. We manufacture Dr. Roller under a sanitized environment and sterilize with Gamma-ray to further ensure the safety and reliability of Dr. Roller.

Features of Dr. Roller

No Adhesives

There are absolutely no forms of adhesives on Dr. Roller. We created ‘flange joint’ assembling system to assemble Dr. Roller, making Dr. Roller without any adhesives.

Superior Needle

Dr. Roller’s needle is high-grade medical stainless steel. Needles also go through 100% inspection through 300x microscope before assembly.

Ergonomic Design

A firm grip is crucial for an effective needling. Dr. Roller’s ergonomic handle provides a firm grip, allowing easy needling.

Safety

Dr. Roller goes through Gamma-ray sterilization, according to ISO 11137.

Superior needles of Dr. Roller

Needles are the most important and essential part of derma roller. Needles contact directly with the skin and the dermis. Any defect with the needle will result in an unsatisfactory result or even a severe side effect. Durable and reliable high-grade medical stainless steel is used to make Dr. Roller’s needle. Dr. Roller’s superior needle provides a better result than any other derma roller exists in the market.